Posts Tagged ‘Odessa’

Newark Plumbing Guide: How to Clean a Porcelain Enamel Bathtub

Monday, May 14th, 2012

No one wants a dirty, grimy tub. After all, that’s the apparatus you use to get clean. But because of the nature of its use, the tub can be tricky to keep clean. Need some tips to keep that porcelain enamel tub looking shiny and clean? Try some of these techniques for a ring-free, pristine bathtub.

Commercial Solutions

Of course, there are a number of commercial cleaning products out there that can be used on porcelain enamel, including in your tub. Here is a look at some of those products and how to use them for better success:

  • Mix a solution of dish soap and hot water. Use a rag or sponge to wipe the tub with the soapy water, then rinse clean. This works well for routine cleaning.
  • Instead of the hot soapy water solution, you can use a commercial spray product designed for the bathroom.
  • Sprinkle scouring powder (e.g., Comet or Ajax) liberally around the tub. Use a damp scouring pad to scrub dirt and grime free from the surface. This is a better solution for deeper cleaning, once a month or so.
  • For tougher stains that a scouring pad doesn’t get out, try a pumice stone and some stiffer scrubbing.

The Natural Route

If you don’t have the necessary cleaning products around, or just prefer to do things more naturally, there are some techniques involving products you probably already have around the house that can also get your tub sparkling. See if any of these methods work for you:

  • Make your own scouring powder with equal parts baking soda and salt. Use this once a week with a warm rag.
  • For rust stains, sprinkle them with salt and add lemon juice. Scrub the lemon/salt mixture with a sponge or rag to dislodge the rust.
  • Sprinkle baking soda around the tub and spray with vinegar. The resulting fizzy reaction helps break up deposits of dirt and grime. Scrub with a scouring pad for bonus cleaning action.

There are lots of techniques for keeping tubs clean, and for every method, you can find people who swear by it. Find one that you like and that works for you, and away you go!

For more information about ways to make your Newark bathroom better, give Boulden Plumbing a call!

Tags: , , , , ,
Posted in Plumbing | Comments Off

Signs that You Have Hard Water in Yorklyn

Friday, December 16th, 2011

Hard water is fairly common, even in Yorklyn. It is called hard water because of the minerals in it, such as calcium, iron and lime. Depending on how “hard” the water is, it’s usually perfectly healthy, but can cause some other problems throughout the home.

Hard water can negatively affect the durability of household appliances like dishwashers and washing machines, as well as pipes and fixtures throughout the home. How do you know if you have hard water? Here are some common signs and symptoms to be on the lookout for:

  1. A white, scaly, filmy residue left behind on plumbing fixtures. In particular, you may notice these on showerheads, on stainless fixtures like the basin of your kitchen sink, on your silverware or in the coffee pot.
  2. Clothes that are not getting as clean as they should in the laundry. This is because hard water is less effective at washing away dirt. Likewise, you may notice soap scum residue in your tub or shower.
  3. Little or no lather from shampoo or soap while showering.
  4. A reddish tinge to hair over time. This is due to iron in the water that can temporarily change hair color in the shower.
  5. Water takes a long time to heat, or heating costs that are higher than usual. This is because hard water requires more heat than water with fewer minerals in it.
  6. A foul odor emanating from your water.

If you notice any of these signs, or a combination of them, you may have hard water. There are certain things you can do to control the effects of hard water, such as using a commercial mineral remover to dissolve deposits left on showerheads and other fixtures. Vinegar also works well.

However, the best thing to do is to treat hard water so that it does not damage your plumbing system. A licensed plumber can help you do this by adding water softener to your water supply, among other treatments. These are things that need to be done on an ongoing basis, but will help extend the life of your expensive appliances and plumbing system.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

What to Look for When You Have Water Damage: Some Pointers from Viola

Saturday, November 12th, 2011

Water can be a beautiful thing. But it can be a very nasty thing, too. While water is an essential for life, it brings a high price tag when gone unchecked and allowed to seep, leak, and drain into your Viola home. Damage caused by water can cause structural damage to a building and destruction of its contents. When left unchecked – over time – water damage can lead to mold growth and have a serious affect on building occupants’ health.

The destructive forces of water leave telltale signs throughout a building. Let’s look at some.

  • Wood damage – water can saturate wood, causing it to rot and decay. Check for discolored wood around plumbing fixtures, a sure sign of an ongoing or older leak that has since been repaired. Just because a leak has been fixed, the after-effects can linger. Soft or uneven surfaces around a plumbing fixture are a sure indication of water damage. Pull back carpeting, pads, tiling, or flooring to get to the root of the problem.
  • Drywall damage – porous material like drywall can leave many signs of water damage and, like wood, can be seriously degraded by water damage. Check for discoloration around plumbing fixtures and soft spots. Don’t assume that a dry surface that is stained is not a structural problem. You may have to cut out the drywall to reach the true source of the water damage.
  • Ceiling tile stains – a sure sign that water is coming in from a source above a roof or ceiling. Ceiling tiles are a porous material that are great for showing every little bit of moisture or water that comes in contact with them. The same is true with plaster or drywall ceilings. Stains indicate a more serious problem and should be investigated right away.
  • Damp, musty smells – water can leave some unpleasant odors, especially untreated water. Leaks or standing water are a source for higher humidity levels in a home. If you are standing in an area where water has soaked into floors or walls, there is often a damp, humid smell. Don’t mistake it for high humidity levels in the home. The smell can come from hidden sources like a leaking pipe joint or broken valve behind an access door.
  • Mold build-up – wood and drywall surfaces provide great food for mold growth when saturated with water. The mold can be of a harmless nature but often can become dangerous black mold. When black mold spores are airborne they can cause respiratory problems and even worse, medial problems down the road. Look for unusual clusters of mold in damp areas and if you find some, immediately call a professional plumber to suggest clean-up and to repair the source of the water leak.

There are many signs of water leakage in the home, caused by leaking or broken pipes, dripping faucets from worn-out washers, cracks in the walls and foundations allowing ground and rain water to seep in, etc. Find and fix the source immediately or pay even higher costs in repair bills later on.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Bathtub Replacement: Why You Should Call a Contractor in Pike Creek

Tuesday, September 27th, 2011

A bathtub replacement is not something you will have to worry about every day in Pike Creek. However, there will likely come a time when you do need to get rid of your old tub and put in a new one. Whether your old tub is simply beyond repair or you just decided that it was time for a change, putting in a new bathtub is a significant undertaking.

Even if you have considerable plumbing skills, you would do well to hire an outside contractor to take care of a bathtub replacement or installation project. There are a lot of factors to take into account when you are installing a bathtub in your home, and experienced contractors know what to look for and how to adjust to the various situations that can arise.

For one thing, you will probably have a very hard time physically moving both the old tub being replaced and the new on that needs to go in. And even if you are physically capable of moving this type of heavy equipment, you will still run the risk of damaging other parts of your house in the process. A skilled contractor with a team can much more easily get an old tub out and a new tub in place.

Plus, when you hire a contractor for this type of work, you will most likely not have to worry about how to dispose of your old tub once you are done with it. The majority of contractors will take care of this type of disposal for you, which is a big help since you probably do not want an old bathtub sitting in your yard indefinitely.

Another thing to consider is that the plumbing work needed to properly put a bathtub in place is rather complicated. You need to have relatively advanced plumbing skills in order to carry it out properly. And if you do not manage to complete a proper installation, you will have no end of problems later on. It is well worth the investment to have a contractor come in and install your bathtub when the alternative is paying for more costly repairs later on.

Tags: , , , , ,
Posted in Plumbing | Comments Off

How Can I Get Better Flow from My Faucets?

Wednesday, July 20th, 2011

Most of us realize that a drain can get clogged or that the pipes in our home might require extra repairs every now and then, but rarely do we realize that when the faucet is not providing a strong, steady flow of water, it is likely because of a clog in the actual faucet. If you are suffering from low flow in your faucets or worse, sputtering and clogging, here are some tips to help fix the problem.

Why it Happens

The reason that so many faucets now have problems related to clogging is that they have been changed and redesigned over the years to reduce water flow. Older faucets would pour ridiculous amounts of water through the drain – not at all good for the environment. Today, aerators and other technology advancements greatly reduce the amount of water used, but also tend to cause these types of clogs.

Checking Your Aerator

The easiest way to fix a slow flowing faucet is to check the aerator tip for unwanted sediment. Despite filtration of tap water, over time small bits of sand, dirt, and other sediment can and will build up in the aerator. That sediment should be cleaned out of the tip of the aerator at least once a month to keep it from slowing the flow of water.

If a water main breaks somewhere or a problem occurs in the water supply outside of your home, this type of sediment might start to build up more rapidly and cause immediate clogs in your faucet. Other things that might build up include pieces of pipe or flux from plumbing joints that break free and enter the water supply. None of it poses a health problem, but it can be frustrating when it gets into your faucets and blocks the water supply.

Valve Cartridge

If the aerator is not the problem it may be in the valve cartridge. To fix this, you will need to replace the part. Each faucet can be very different, so you should refer to your owner’s manual (many of which are online) for how to take this part out of the faucet assembly. When you go to the hardware store, be sure to take the valve cartridge with you so you can get the exact piece you need for replacement.

The easiest way to avoid a clog in your faucets is to be careful with any repairs you make. While a water main break is not something you can control, you can control how the water supply is affected when someone does repairs on your home’s plumbing. Leave faucets open outside, turn the main valve back on slowly and check your faucet immediately after the repair to ensure no sediment gets clogged in the assembly.

Tags: , ,
Posted in Plumbing | Comments Off

How a Water Softener Works

Monday, June 27th, 2011

You use water for many things. It is necessary for bathing, cooking, washing clothes and for drinking. But the water we use in our homes is not pure. It has plenty of other minerals and additives suspended inside. While some of these, like fluoride, are intentionally added to the water supplies in certain areas, some others get in by chance.

Aside from actual pollutants, the additives you may be the most concerned about finding in your water are calcium and magnesium. These minerals are picked up by water as it moves through the ground, and the more of them that get into your home water supply, the harder that water will be.

The term hard water is used to describe water with high levels of calcium and magnesium present. These minerals are not actually dangerous to us, but they can cause all sorts of problems for your indoor plumbing and other household systems. For instance, hard water will leave deposits of these minerals on the insides of pipes and on sinks, faucets and bathtubs.

Residue will also build up in appliances like coffee makers, dish washers and washing machines. Over time these buildups can become a real problem and you may have to pay for costly repairs or need to replace large appliances.

In order to avoid these types of complications, your best bet is to have a water softener installed. These systems can be connected directly to your home water source and they are able to remove excess calcium and magnesium from the water before it ever reaches any of your indoor plumbing or appliances.

Water softeners generally remove these minerals by attracting the positively charged calcium and magnesium particles with a tank full of negatively charged polystyrene particles. In this system, the calcium and magnesium are replaced by sodium ions as they move through the water softener, thereby maintaining the overall balanced composition of the water. Once the water has passed through and the calcium and magnesium have been left behind, the water softener will flush them out and prepare to absorb another wave of hard water minerals.

Tags: , , ,
Posted in Plumbing | Comments Off